Tips for Maintaining a Clean iPhone Speaker

Tips for Maintaining a Clean iPhone Speaker

 
First Technique: A Gentle Bristle Brush
When cleaning the speakers, Apple suggests using a brush with gentle bristles.

1. To begin, remove any cases or screen protectors from your iPhone.
2. Second, shine a flashlight into the speaker holes to see what you're dealing with.
   
3. Third, make sure the brush you're about to use is clean, dry, and has soft bristles so it won't scratch the surface while cleaning it. Brushes designed for makeup application or painting are suitable alternatives. 
   
4. Brush gently from side to side at an angle to push dust out rather than into the speaker's vents.
   
5.  after each stroke, tap the brush on a hard surface to get rid of the dust that has accumulated.
6. With a soft bristle brush, remove any excess dust from the lower speaker holes in the area of the charging port. Dust and dirt can be removed by placing the bristles into the holes, gently rotating them, and then pulling them out.
   

Second, you can use painter's tape.
Masking tape or painter's tape is another common tool for painters. This tape is not as sturdy as others, but unlike others, it will not leave any residue on your phone when removed.
 

1. Firstly, if you want to use the speakers, you should remove the case and the screen protector.
2. Two, use your flashlight to examine the garbage more closely.
   
3. The next step is to wrap a tiny piece of painter's tape around the end of your finger, sticky side down.
   
4. To remove dust from the receiver, simply roll it from side to side with your finger. It is not essential to use an inordinate amount of force; all that is needed is for the tape to penetrate the speaker.
   
5. To use the tape on the phone's tiny speaker holes on the bottom, you'll need to roll it into a more pointed form (see number 5).